Nutrient Management and Irrigation systems

Jacksonville Duval County 904-346-1266
St Augustine St Johns County 904-824-7144
Orange Park Clay County 904-264-6444
Jacksonville Beaches Duval County 904-246-3969
Fernandina Nassau County 904-277-3040
Macclenny Baker County 904-259-5091
Palm Coast Flagler County 386-439-5290
Daytona Volusia County 386-253-4911
Serving all of Florida and Georgia at 904-346-1266

EMAIL LARRY@1STPROP.COM (feel free to email your bidding packages here)

Nutrient Management
applying nutrients in the field

Source: USDA – Natural Resources Conservation Service

* Operations and Timing
* Equipment Used
* Potential Environmental Problems
* Best Management Practices

Plant nutrients, which come primarily from chemical fertilizers, manure, and in some cases sewage sludge, are essential for crop production. When applied in proper quantities and at appropriate times, nutrients (especially nitrogen, phosphorus, and potassium) help achieve optimum crop yields. However, improper application of nutrients can cause water quality problems both locally and downstream. Nutrient management is the practice of using nutrients wisely for optimum economic benefit, while minimizing impact on the environment.
Operations and Timing
truck applying nutrients in field

Source: USDA – Natural Resources Conservation Service

Farmers sometimes apply fertilizer soon after the previous year’s harvest, since equipment and labor are usually available then. Fertilizer can also be applied in the spring, near the time it is needed by the plant, usually at planting, or as side-dress after the crop has started to grow. In general, the greatest efficiency results when fertilizer is applied at planting time or during the early part of growing season.

Proper timing is most important with nitrogen fertilizer. In some locations, a large part of the nitrogen may be lost if it is applied too long before the crop is planted, particularly if applied the previous fall before soil temperature drops to below 50° F. Phosphorus application is also most efficient when made at or near planting time, especially with soils low in phosphorus. Time of application is less critical with potassium than with nitrogen or phosphorus.
Knowing how much fertilizer to apply can be difficult. Soil tests are used to determine soil deficiencies for nutrients such as phosphorus and potassium. It is more difficult to determine nitrogen needs in advance, however, and most farmers simply use standard nitrogen recommendations based on crop yield goals. Recommendations are provided by Cooperative Extension services in most states. Other farmers get recommendations from fertilizer dealers and crop consultants.

Common nitrogen fertilizers are anhydrous ammonia (82% nitrogen), urea (45% nitrogen), urea and ammonium nitrate solutions (28% nitrogen), and ammonium nitrate (33.5% nitrogen). Manure can be an excellent source of Nitrogen (N), Phosphorous (P), and Potassium (K) plant nutrients. Every load of manure is different, however, so manure testing is necessary to accurately estimate nutrient contents.

Top of Page
Equipment Used

Farm tractor and tillage implementation
Source: Daniel R. Ess, Purdue University

Tractors – are traction machines that provide mechanical, hydraulic, and/or electrical power to implements to perform a wide range of crop production and handling operations. Tractors are most often used to perform drawbar work and PTO (power take-off) work. Tractors can be equipped with rubber tires, rubber belts, or steel tracks. A modern farm tractor is almost always equipped with a diesel engine and tractor size is measured by the amount of power that the tractor can produce at the PTO. Tractor sizes range for those with less than 40 PTO horsepower to ones that produce more than 400 horsepower. The cost of a large tractor can exceed $200,000.

Tractor-Sprayer-Field Cultivator Combo

A tractor-sprayer-field cultivator combo that performs tillage and crop chemical application operations simultaneously
Source: Ag-Chem, a division of AGCO Corporation

Sprayers – are implements or vehicles used to apply liquid crop chemicals, most often herbicides, and increasingly, fertilizers. Sprayers typically include a tank, pump, plumbing, valves, a boom, and nozzles. Sprayers can be mounted on a tractor or other implement, pulled by a tractor, self-propelled, or mounted on airplanes or helicopters. Large self-propelled sprayers that incorporate technologies to vary application rates within a field can cost more than $250,000.

Self-Propelled Sprayer

A self-propelled sprayer broadcasting crop chemicals in the field
Source: Ag-Chem, a division of AGCO Corporation

Pull Type Sprayer and Tractor

A pull-type sprayer and tractor
Source: Ag-Chem, a division of AGCO Corporation

Twelve-Row Planter

A twelve-row planter working in a conventionally-tilled field
Source: Daniel R. Ess, Purdue University

Planters – are implements used to plant row crops (typically in row spacing ranging from 10 to 40 inches). Planters open a seed trench, meter seeds one-at-a-time, drop seeds into the seed trench, and gently cover the seed. Some planters can cut through residues and till a small strip of soil in each row at the time of planting. Planters can also be equipped to apply liquid fertilizer, pesticides, and herbicides during planting. Planters come in sizes as large as sixty feet wide – that is twenty-four rows with a typical 30-inch row spacing, or thirty-six rows with a narrower 20-inch row spacing. Such large planters can cost in excess of $100,000.
Self-Propelled Spreader

A self-propelled spreader that uses spinning disks to distribute dry crop chemicals
Source: Ag-Chem, a division of AGCO Corporation

Spreaders – are implements or vehicles used to apply dry crop chemicals, most often fertilizers. Spreaders typically include a bed, conveyor, and either a set of spinning disks to distribute material over a wide area or a pneumatic system to push material through openings in a boom for distribution on the ground. Spreaders can be mounted on a tractor, pulled by a tractor, self-propelled, or mounted on airplanes. Large self-propelled spreaders that incorporate technologies to vary application rates of multiple dry chemicals within a field can cost more than $250,000.
Self-Propelled Spreader

A self-propelled spreader that uses a pneumatic system to evenly distribute dry crop chemicals
Source: Ag-Chem, a division of AGCO Corporation

Tractor-Drawn Toolbar

A tractor-drawn toolbar being used to inject anhydrous ammonia into the soil. The wagon mounted tank attached to the toolbar supplied ammonia.
Source: Daniel R. Ess, Purdue University

Toolbars – are implements that can use a range of soil-engaging tools typically mounted to a long steel bar of rectangular cross-section. A toolbar equipped with a set of uniformly spaced steel discs can be used to create trenches in the soil into which liquid fertilizers can be applied or gaseous fertilizers (such as anhydrous ammonia) can be injected. Toolbar fertilizer applicators lend themselves to sidedress application in standing crops.

Top of Page
Potential Environmental Concerns

Water quality problems can occur when nutrients are added to the soil at a time when they could be removed in surface runoff from rainfall or snow melt at rates exceeding that removed by the crop, or if applied at times that they cannot be utilized by the crop.

When nitrogen or phosphorus are present in lakes or rivers at a high concentration, a condition called “eutrophication” or biological enrichment can occur. High nitrogen from the Mississippi River has been blamed for a hypoxic or “dead” zone in the Gulf of Mexico, where excess algae grow in response to the enriched nutrient solution and few fish can be found. When the algae die, their decomposition consumes enough dissolved oxygen to suffocate fish and other animal life. Sources of nitrogen contributing to the problem include agricultural runoff, sewage treatment plants, atmospheric nitrogen, and other sources.

Excessive nitrate in ground water can present a direct health hazard to very young infants. Ingestion of nitrate (NO3) can bind with hemoglobin in the infant’s bloodstream and cause a condition called methemoglobinemia or “blue baby” syndrome. Nitrate does not bind to soil particles and is quite soluble, making it susceptible to leaching into groundwater if not used by the crop.

Top of Page
Best Management Practices
soil testing in field

Source: USDA – Natural Resources Conservation Service

* Use regular soil tests to determine nutrient needs, and apply only the amount of nutrients needed by the crop to be grown. Site-specific nutrient application varies the amount of nutrients within fields based on a series of soil tests and global positioning equipment.
* Use manure tests to determine nutrient content, and take credit for the nutrient content of manure.
* Use conservation tillage and other erosion-control practices to minimize loss of phosphorus that is attached to the soil. (See Best Management Practices for Soil Erosion).
* Improve timing of fertilizer application, applying nutrients just before they are needed by the crop. Most of the nitrogen is needed by corn after the plant is three to four weeks old. The most efficient method of applying N fertilizer is as sidedress after planting.
* Look for a low soil test to decide which field to apply manure on and base manure application rate on the manure test for N.

Top of Page